Klipsch CDT-5800-CII In-Ceiling System #42

Klipsch CDT-5800-CII In-Ceiling System #42

$2,095.00
852684961135

Model #: Klipsch CDT-5800-CII In-Ceiling System #42

Description


Sound Distributors Is An On- Line Authorized Dealer.
What This Means!!!

Full Factory Warranty Is Valid.
Serial Numbers In-Tact.
Factory Sealed BoNoes.
Free Shipping!

Our Promise To You:
We Will Meet Or Beat Any Advertised Price - Send Us A Link Or Get Us On The Phone, We Will NOT Be Undersold!

You will receive

5 CDT5800CII
1 SW-115 SUB

Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology (CDT), both the high and low frequencies of the CDT- 5800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT- 5800-C features a 1-inch titanium tweeter mated to a swiveling 100- degree Tractrix Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn- loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch Cerametallic woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble and bass contour switches, help the CDT- 5800-C establish a new benchmark in architectural audio excellence.

Available in a white finish, the paintable CDT-5800-C can be paired with a Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Klipsch SW-115 Powered Subwoofer

The Klipsch SW-115 subwoofer delivers bass response below 20 Hz. Whether it's the synthesized bass of an explosion or earthquake from a film or the extremely low true bass of a pipe organ or the distinct multiple low notes coming from a bass guitar, you will sit up and take notice of any and all extremely low frequencies.

The SW- 115's presence will be felt even in oversized rooms but its aesthetics allow it to blend within any setup or room size.

Its front-firing 15-inch driver and slot port not only reinforces the large driver for extremely high output, its design also helps to solidify the cabinet for minimal resonance. That means the Klipsch SW-115 subwoofer can be built into a wall or cabinet or hang out in a corner and still deliver maximum output and minimum "boominess."

But this beast is also conscious of its surroundings. The 1-watt standby mode offers the very latest in energy-saving technology.

Hear and feel what might otherwise dip below the radar with the Klipsch SW-115.

Specifications

CDT- 5800- C
Frequency Response 49Hz-20kHz ? 3dB
Power Handling 50 watts (200 watts peak)
Sensitivity 94dB @ 1 watt/1 meter
Nominal Impedance 8 ohms
Crossover Frequency 2230Hz Two-way system using one 1" (2.5cm) titanium dome compression tweeter with a swiveling
Drive Components 100? Tractrix Horn and one 8" (20.3cm) pivoting aluminum cone woofer
Fire Rated Enclosure ME-800-C (sold separately)
Enclosure Type ABS/ Infinite baffle, front flush with ceiling
Wire Gauge Accommodated 12
Width 11" (27.9cm)
Cutout Dimensions 9.8" (24.9cm)
Mounting Depth 5.4" (13.7cm)
Installation Kit IK-800-C (sold separately)
Weight 7.4 lbs. (3.4kg)
Built From 2005
SW-115 Powered Subwoofer
Amplifier Power 400 watts continuous @ <2% THD / Dynamic Power*: 800 watts
Amplifier Type BASHR Digital Hybrid
Built From 2011
Dimensions 19.75" (50.2cm) H x 24" (61cm) W x 24" (61cm) D
Drive Components 15" (38.1cm) Active non-resonant Woven Fiberglass driver
Enclosure Type Bass-reflex via front-firing slot port
Export Version NA, EU
Finish Black pica
Frequency Response 18Hz-150KHz ? 3dB
Inputs L/R Line-level RCA jacks, L/R High-level speaker binding posts, WA port
Max Acoustic Output 121dB @ 30Hz 1/8 space, 1m
Outputs None
Voltage 100-120V / 220- 240V~50/60Hz 4A (Auto- voltage switching) with 1 Watt standby
Weight 69lbs (31.3kg)

Reviews

  • Be the first to leave a review!

Sign In to leave a review