Klipsch CDT3800CII In-Wall System #54

Klipsch CDT3800CII In-Wall System #54

$2,018.00
852684962866

Model #: Klipsch CDT3800CII In-Wall System #54

Description


Sound Distributors Is An On- Line Authorized Dealer.
What This Means!!!

Full Factory Warranty Is Valid.
Serial Numbers In-Tact.
Factory Sealed BoNoes.
Free Shipping!

Our Promise To You:
We Will Meet Or Beat Any Advertised Price - Send Us A Link Or Get Us On The Phone, We Will NOT Be Undersold!

You will receive

4 R3800WII
1 RC62II CENTER
1 SW-115 SUB

Discreet but not understated, the high-performance and installer-friendly R- 3800-W II in-wall loudspeaker delivers all the gusto you'd expect from Klipsch.

. Horn-loaded technology increases acoustic output while significantly reducing distortion
. Pivoting Tractrix Horn compression driver tweeter with a Linear Travel Suspension
. Treble attenuation switch and IR receiver knock out
. Single piece grille frame and rustproof aluminum grille
. Elegant new, low-profile SlimTrim magnetic grille

Featuring an 8-inch IMG woofer a 1-inch aluminum tweeter mated to a square 90- degree by 60-degree pivoting Tractrix Horn as well as a treble contour switch, this dynamic in- wall speaker gives you plenty of bang for your buck and brings high- quality entertainment into your home without taking up valuable floor space. Not to mention because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well- defined imaging.

Available in a paintable white finish, the R-3800-W II can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws staples or nails. Painted white for easy marking and placement these metal wings can be folded around the edge of the studs if necessary.

Klipsch SW-115 Powered Subwoofer

The Klipsch SW-115 subwoofer delivers bass response below 20 Hz. Whether it's the synthesized bass of an explosion or earthquake from a film or the extremely low true bass of a pipe organ or the distinct multiple low notes coming from a bass guitar, you will sit up and take notice of any and all extremely low frequencies.

The SW-115's presence will be felt even in oversized rooms but its aesthetics allow it to blend within any setup or room size.

Its front-firing 15-inch driver and slot port not only reinforces the large driver for extremely high output, its design also helps to solidify the cabinet for minimal resonance. That means the Klipsch SW-115 subwoofer can be built into a wall or cabinet or hang out in a corner and still deliver maximum output and minimum "boominess."

Specificatio n:
R- 3800-W II
Built From

2012

Crossover Frequency 2200Hz
Cutout Dimensions 14.75" (37.47cm) x 9.25" (23.50cm)
Enclosure Material/Type ABS/Infinite baffle, front flush with wall
Finish White paintable frame and grill
Frequency Response 46Hz- 23KHz ? 3dB
High Frequency Driver 1" (2.54cm) Aluminum dome compression driver mated to a 4" (15.24cm) square 90? x 60? pivoting TractrixA Horn
Installation Kit IK-800-W (sold separately)
Low Frequency Driver 8" (20.32cm) IMG cone woofer
Mounting Depth 3.75" (9.5cm)
Nominal Impedance 8 ohms compatible
Power Handling 50W RMS / 200W Peak
Recommended Amplifier Power 100 W
Sensitivity 93dB 2.83V / 1m
Weight 7.9 lbs. (3.58kg)
R-5502- W
Frequency Response

46Hz-20kHz +/-3dB

Power Handling 75W continuous / 300W peak
Recommended Amplifier Power 130W
Sensitivity 92dB @ 2.83V / 1m
Nominal Impedance 8 ohms compatible
High Frequency Drivers 1" (2.5cm) Titanium diaphragm compression driver
mated to pivoting 90? x 90? square Tractrix Horn
High Frequency Crossover 2200Hz & 1300Hz
Low Frequency Drivers Dual 5.25" (13.3cm) Cerametallic Cone woofers
Enclosure Material ABS
Enclosure Type Infinite baffle, front flush with wall
Dimensions 17.75" (45.1cm) H x 8" (20.3cm) W
Mounting Depth 3.5" (8.9cm)
Cutout Dimensions 16.5" (41.9cm) H x 6.5" (16.5cm) W
Installation Kit IK- 502-W (sold seperately)
Weight 6.5lbs (2.9kg)
Finishes White paintable frame and grille
Built From 2008

Reviews

  • Be the first to leave a review!

Sign In to leave a review