Dolby Atmos 3.1.2 Klipsch RP-280F Tower Speakers R112SW with Onkyo TX-NR838

Dolby Atmos 3.1.2 Klipsch RP-280F Tower Speakers R112SW with Onkyo TX-NR838

$3,148.60 (System)
682962767469

Model #: Dolby Atmos 3.1.2 Klipsch RP-280F Tower Speakers R112SW with Onkyo TX-NR838

Description

A Dolby Atmos Ready System

You WIll Receive: 2 Klipsch RP-280F Tower Speaker, 1 Onkyo TX-NR838, 1 Klipsch RP-450C Center, 1 Klipsch R112SW, , 2 Klipsch CDT-5800-C II In-Ceiling Speaker

Klipsch RP-280F Floorstanding Tower Speakers:
  • Frequency response: 31-24Khz +/- 3dB
  • Sensitivity: 98dB @ 2.83V/ 1m
  • Power handling (continuous/ peak): 150W/ 160W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1400Hz
  • High frequency driver: 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
  • Low frequency driver: Dual 8-inch cerametallic cone woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: Dual binding posts/ bi-wire/ bi-amp

Klipsch RP-450C Center Speaker:
  • Frequency Response: 62-24kHz +/- 3dB
  • Sensitivity: 97dB @ 2.83V / 1
  • Power handling (continuous/ peak): 200W/800W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1100W/1400W
  • High frequency driver: 1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
  • Low frequency driver: Quad 5.25" Cerametallic Cone Woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: single binding posts

Onkyo TX-NR-838 7.2 Channel Network A/V Receiver
  • Built-in Wi-Fi and Bluetooth
  • 4K/60 Hz-ready HDMIR terminals
  • HDCP 2.2 compatibility
  • THX certification
  • QdeoTM 4K video upscaling technology
  • Dual 32-bit DSP Engines

Klipsch R-112SW Subwoofer:
  • 12-inch spun-copper cerametallic woofer
  • All-digital amplifier delivers 600 watts of dynamic power
  • Front-firing slot port with exclusive internal flare technology
  • L/R line-level/ LFE RCA inputs for compatibility with most receivers
  • Add an optional Klipsch WA-2 wireless subwoofer kit for wireless connection
  • Brushed black polymer veneer cabinet with satin painted plinth

Klipsch designed the CDT-5800-C II to meet the market's demand for a high-performance in-ceiling loudspeaker that easily challenges the inherent limitations of fixed locations.
  • Frequency Response: 49Hz-23Khz ? 3Db
  • Sensitivity: 95Db @ 2.83V / 1M
  • Power Handling: 50W Rms / 200W Peak
  • Nominal Impedance: 8 Ohms Compatible
  • Recommended Amplifier Power: 100 W
  • Low Frequency Driver: 8-inch (20.32Cm) Pivoting Cerametallic Cone Woofer
  • Crossover Frequency: 2230Hz
  • Enclosure Material/Type: Abs/Infinite Baffle, Front Flush With Wall

Reviews

  • Be the first to leave a review!

Sign In to leave a review