Dolby Atmos 3.1.2 Klipsch RP-280F Tower Speakers SW-112 with Denon AVR-X4100W

Dolby Atmos 3.1.2 Klipsch RP-280F Tower Speakers SW-112 with Denon AVR-X4100W

$3,149.30 (System)
682962767506

Model #: Dolby Atmos 3.1.2 Klipsch RP-280F Tower Speakers SW-112 with Denon AVR-X4100W

Description

A Dolby Atmos Ready System

You WIll Receive: 2 Klipsch RP-280F Tower Speaker, 1 Denon AVR-X4100W, 1 Klipsch RP-450C Center, 1 Klipsch SW-112, , 2 Klipsch CDT-5800-C II In-Ceiling Speaker

Klipsch RP-280F Floorstanding Tower Speakers:
  • Frequency response: 31-24Khz +/- 3dB
  • Sensitivity: 98dB @ 2.83V/ 1m
  • Power handling (continuous/ peak): 150W/ 160W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1400Hz
  • High frequency driver: 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
  • Low frequency driver: Dual 8-inch cerametallic cone woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: Dual binding posts/ bi-wire/ bi-amp

Klipsch RP-450C Center Speaker:
  • Frequency Response: 62-24kHz +/- 3dB
  • Sensitivity: 97dB @ 2.83V / 1
  • Power handling (continuous/ peak): 200W/800W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1100W/1400W
  • High frequency driver: 1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
  • Low frequency driver: Quad 5.25" Cerametallic Cone Woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: single binding posts

Denon AVR-X4100W 7.2 Channel Audio/Video Receiver with Wi-Fi and Bluetooth:
  • Dolby Atmos surround sound decoding
  • Bluetooth and Wi-Fi
  • Dual RF antennas
  • 8HDMI inputs and 3 HDMI Outputs
  • 4K Ultra HD 60Hz video pass-through and upscaling
  • Compatible with Pure Color 4:4:4 color sub-sampling
  • ISFccc advanced video calibration controls.
  • High Resolution Audio Decoders including Dolby Atmos, Dolby TrueHD and DTS-HD Master Audio, DTS Neo:X, Dolby Pro Logic Iiz
  • Equipped with MultEQ XT32 automatic room acoustic measurement and correction system
  • Audyssey Dynamic EQ and Volume included
  • Dynamic Surround Expansion
  • Apple Airplay, DNLA compatible.

Klipsch SW-112 Powered Subwoofer:
  • Frequency Response: 26Hz-120KHz 3dB
  • Sensitivity: 106dB @ 40Hz
  • Max Acoustic Output: 16dB @ 30Hz
  • Amplifier Power: FTC Rated Power: 300 watts continuous @ <2% THD / Dynamic Power*: 600 watts
  • Drive components: 12-inch (30.5cm) Active non-resonant Woven Fiberglass driver
  • Amplifier: BASH Digital Hybrid class-AB
  • Enclosure Type: Bass- reflex via front-firing slot port
  • Inputs: L/R Line-level RCA jacks, L/R High-level speaker binding posts, WA port

Klipsch designed the CDT-5800-C II to meet the market's demand for a high-performance in-ceiling loudspeaker that easily challenges the inherent limitations of fixed locations.
  • Frequency Response: 49Hz-23Khz ? 3Db
  • Sensitivity: 95Db @ 2.83V / 1M
  • Power Handling: 50W Rms / 200W Peak
  • Nominal Impedance: 8 Ohms Compatible
  • Recommended Amplifier Power: 100 W
  • Low Frequency Driver: 8-inch (20.32Cm) Pivoting Cerametallic Cone Woofer
  • Crossover Frequency: 2230Hz
  • Enclosure Material/Type: Abs/Infinite Baffle, Front Flush With Wall

Reviews

  • Be the first to leave a review!

Sign In to leave a review