Dolby Atmos 3.1.4 Klipsch RP-280F Tower Speakers w/ R-115SW and Onkyo TX-NR1030

$4,218.60 (System)

UPC #: 682962769012

Model #: Dolby Atmos 3.1.4 Klipsch RP-280F Tower Speakers w/ R-115SW and Onkyo TX-NR1030

Description

A Dolby Atmos Ready System

You WIll Receive: 2 Klipsch RP-280F Tower Speaker, 1 Onkyo TX-NR1030, 1 Klipsch RP-450C Center, 1 Klipsch R-115SW, , 4 Klipsch CDT-5800-C II In-Ceiling Speaker

Klipsch RP-280F Floorstanding Tower Speakers:

Frequency response: 31-24Khz +/- 3dB
Sensitivity: 98dB @ 2.83V/ 1m
Power handling (continuous/ peak): 150W/ 160W
Nominal impedance: 8 Ohms Compatible
Crossover frequency: 1400Hz
High frequency driver: 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
Low frequency driver: Dual 8-inch cerametallic cone woofers
Enclosure type: Bass Reflex via rear-firing Tractrix port
Inputs: Dual binding posts/ bi-wire/ bi-amp

Klipsch RP-450C Center Speaker:

Frequency Response: 62-24kHz +/- 3dB
Sensitivity: 97dB @ 2.83V / 1
Power handling (continuous/ peak): 200W/800W
Nominal impedance: 8 Ohms Compatible
Crossover frequency: 1100W/1400W
High frequency driver: 1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
Low frequency driver: Quad 5.25" Cerametallic Cone Woofers
Enclosure type: Bass Reflex via rear-firing Tractrix port
Inputs: single binding posts

The Onkyo TX-NR1030 9.2-Ch Dolby Atmos Network A/V Receiver: Separate amp and processing blocks, a massive high-current transformer, seven Burr-Brown DACs, and dual 32-bit DSP engines.

11.4-multichannel pre-outs and 135 Watts per channel
8-in/3-out 4K/60 Hz HDMI 2.0 terminals
DTS Neo:X upmixing, 4K video upscaling, ISF video calibration, and smartphone control
Dolby Atmos
Built-In Wi-Fi and Bluetooth
Multi-Zone Audio and Front Channel Bi-Amping
Engineered for Hi-res Audio

Klipsch R-115SW 800 Watt Subwoofer:

15 inch spun-copper Cerametallic woofer
All-digital amplifier delivers 800 watts of dynamic power
Front-firing slot port with exclusive internal flare technology
L/R line-level/LFE RCA inputs for compatibility with most receivers
For a simple wireless connection, add an optional Klipsch WA-2 Wireless Subwoofer Kit
Frequency response: 18Hz-125Hz +/-3dB
Maximum acoustic output: 122dB
Amplifier: All digital
Amplifier Power: 400W / 800W
Drive components: 15-inch (38.1 cm) long-throw copper spun cerametallic, front-firing woofer
Inputs: L/R line-level/LFE RCA jacks, Wireless WA-2 Port

Klipsch designed the CDT-5800-C II to meet the market's demand for a high-performance in-ceiling loudspeaker that easily challenges the inherent limitations of fixed locations.

Frequency Response: 49Hz-23Khz ? 3Db
Sensitivity: 95Db @ 2.83V / 1M
Power Handling: 50W Rms / 200W Peak
Nominal Impedance: 8 Ohms Compatible
Recommended Amplifier Power: 100 W
Low Frequency Driver: 8-inch (20.32Cm) Pivoting Cerametallic Cone Woofer
Crossover Frequency: 2230Hz
Enclosure Material/Type: Abs/Infinite Baffle, Front Flush With Wall