Dolby Atmos 5.1.4 Klipsch RP-280F Tower Speakers PL-200 with Pioneer Elite SC-85

$4,270.00 (System)

UPC #: 682962768350

Model #: Dolby Atmos 5.1.4 Klipsch RP-280F Tower Speakers PL-200 with Pioneer Elite SC-85

Description

A Dolby Atmos Ready System

You WIll Receive: 2 Klipsch RP-280F Tower Speaker, 1 Pioneer Elite SC-85, 1 Klipsch RP-450C Center, 1 PL-200, 2 Klipsch RP-250S Surround Speaker, 4 Klipsch CDT-5800-C II In-Ceiling Speaker

Klipsch RP-280F Floorstanding Tower Speakers:

Frequency response: 31-24Khz +/- 3dB
Sensitivity: 98dB @ 2.83V/ 1m
Power handling (continuous/ peak): 150W/ 160W
Nominal impedance: 8 Ohms Compatible
Crossover frequency: 1400Hz
High frequency driver: 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
Low frequency driver: Dual 8-inch cerametallic cone woofers
Enclosure type: Bass Reflex via rear-firing Tractrix port
Inputs: Dual binding posts/ bi-wire/ bi-amp

Klipsch RP-450C Center Speaker:

Frequency Response: 62-24kHz +/- 3dB
Sensitivity: 97dB @ 2.83V / 1
Power handling (continuous/ peak): 200W/800W
Nominal impedance: 8 Ohms Compatible
Crossover frequency: 1100W/1400W
High frequency driver: 1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
Low frequency driver: Quad 5.25" Cerametallic Cone Woofers
Enclosure type: Bass Reflex via rear-firing Tractrix port
Inputs: single binding posts

Pioneer Elite SC-85 9.2 Channel Networked Class D3AV Receiver with HDMI:

The Pioneer Elite SC-85 AV receiver delivers an unrivaled surround-sound experience, combining the incredible realism of Dolby Atmos with the serious power of class D3 amplification.
Offering effortless connectivity, advanced room correction and flexible multi-zone features, the SC-85 will redefine the way you listen.
HDMI: 4k Ultra HD support
Seven (7) HDMI inputs, two (2) outputs
Dolby Atmos upgradable
Class D3 amps

BIC/Acoustech Platinum Series PL-200 subwoofer

PL-200 is driven by an audiophile state-of-the-art BASH amplifier capable of delivering up to 1000-watts dynamic peak output
Front-Firing 12" Long-Throw Powered Subwoofer with state-of-the-art BASH amplifier
Adjustable Crossover
Adjustable volume control
Automatic signal sensing
High level inputs
Dolby Pro Logic & Dolby Digital/DTS inputs.

Klipsch RP-250S Surround Speakers:

Frequency response: 58-24Khz +/- 3dB
Sensitivity: 95dB @ 2.83V/ 1m
Power handling (continuous/ peak): 100W/400W
Nominal impedance: 8 Ohms compatible
Crossover frequency: 1500Hz
High frequency driver: dual 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
Low frequency driver: Dual 5.25-inch cerametallic cone woofers
Enclosure type: Sealed
Inputs: Single binding posts

Klipsch designed the CDT-5800-C II to meet the market's demand for a high-performance in-ceiling loudspeaker that easily challenges the inherent limitations of fixed locations.

Frequency Response: 49Hz-23Khz ? 3Db
Sensitivity: 95Db @ 2.83V / 1M
Power Handling: 50W Rms / 200W Peak
Nominal Impedance: 8 Ohms Compatible
Recommended Amplifier Power: 100 W
Low Frequency Driver: 8-inch (20.32Cm) Pivoting Cerametallic Cone Woofer
Crossover Frequency: 2230Hz
Enclosure Material/Type: Abs/Infinite Baffle, Front Flush With Wall