Dolby Atmos 7.2.4 Klipsch RP-280F Tower Speakers R115SW with Onkyo TX-NR1030

Dolby Atmos 7.2.4 Klipsch RP-280F Tower Speakers R115SW with Onkyo TX-NR1030

$6,107.90 (System)
682962769203

Model #: Dolby Atmos 7.2.4 Klipsch RP-280F Tower Speakers R115SW with Onkyo TX-NR1030

Description

A Dolby Atmos Ready System

You WIll Receive: 2 Klipsch RP-280F Tower Speaker, 1 Onkyo TX-NR1030, 1 Klipsch RP-450C Center, 2 Klipsch R-115SW, 4 Klipsch RP-250S Surround Speaker, 4 Klipsch CDT-5800-C II In-Ceiling Speaker

Klipsch RP-280F Floorstanding Tower Speakers:
  • Frequency response: 31-24Khz +/- 3dB
  • Sensitivity: 98dB @ 2.83V/ 1m
  • Power handling (continuous/ peak): 150W/ 160W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1400Hz
  • High frequency driver: 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
  • Low frequency driver: Dual 8-inch cerametallic cone woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: Dual binding posts/ bi-wire/ bi-amp

Klipsch RP-450C Center Speaker:
  • Frequency Response: 62-24kHz +/- 3dB
  • Sensitivity: 97dB @ 2.83V / 1
  • Power handling (continuous/ peak): 200W/800W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1100W/1400W
  • High frequency driver: 1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
  • Low frequency driver: Quad 5.25" Cerametallic Cone Woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: single binding posts

The Onkyo TX-NR1030 9.2-Ch Dolby Atmos Network A/V Receiver: Separate amp and processing blocks, a massive high-current transformer, seven Burr-Brown DACs, and dual 32-bit DSP engines.
  • 11.4-multichannel pre-outs and 135 Watts per channel
  • 8-in/3-out 4K/60 Hz HDMI 2.0 terminals
  • DTS Neo:X upmixing, 4K video upscaling, ISF video calibration, and smartphone control
  • Dolby Atmos
  • Built-In Wi-Fi and Bluetooth
  • Multi-Zone Audio and Front Channel Bi-Amping
  • Engineered for Hi-res Audio

Klipsch R-115SW 800 Watt Subwoofer:
  • 15 inch spun-copper Cerametallic woofer
  • All-digital amplifier delivers 800 watts of dynamic power
  • Front-firing slot port with exclusive internal flare technology
  • L/R line-level/LFE RCA inputs for compatibility with most receivers
  • For a simple wireless connection, add an optional Klipsch WA-2 Wireless Subwoofer Kit
  • Frequency response: 18Hz-125Hz +/-3dB
  • Maximum acoustic output: 122dB
  • Amplifier: All digital
  • Amplifier Power: 400W / 800W
  • Drive components: 15-inch (38.1 cm) long-throw copper spun cerametallic, front-firing woofer
  • Inputs: L/R line-level/LFE RCA jacks, Wireless WA-2 Port

Klipsch RP-250S Surround Speakers:
  • Frequency response: 58-24Khz +/- 3dB
  • Sensitivity: 95dB @ 2.83V/ 1m
  • Power handling (continuous/ peak): 100W/400W
  • Nominal impedance: 8 Ohms compatible
  • Crossover frequency: 1500Hz
  • High frequency driver: dual 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
  • Low frequency driver: Dual 5.25-inch cerametallic cone woofers
  • Enclosure type: Sealed
  • Inputs: Single binding posts

Klipsch designed the CDT-5800-C II to meet the market's demand for a high-performance in-ceiling loudspeaker that easily challenges the inherent limitations of fixed locations.
  • Frequency Response: 49Hz-23Khz ? 3Db
  • Sensitivity: 95Db @ 2.83V / 1M
  • Power Handling: 50W Rms / 200W Peak
  • Nominal Impedance: 8 Ohms Compatible
  • Recommended Amplifier Power: 100 W
  • Low Frequency Driver: 8-inch (20.32Cm) Pivoting Cerametallic Cone Woofer
  • Crossover Frequency: 2230Hz
  • Enclosure Material/Type: Abs/Infinite Baffle, Front Flush With Wall

Reviews

  • Be the first to leave a review!

Sign In to leave a review