Dolby Atmos 3.1.4 Klipsch RP-280F Tower Speakers PL-200 with Denon AVR-X4200W

Dolby Atmos 3.1.4 Klipsch RP-280F Tower Speakers PL-200 with Denon AVR-X4200W

$3,569.30 (System)
682962774979

Model #: Dolby Atmos 3.1.4 Klipsch RP-280F Tower Speakers PL-200 with Denon AVR-X4200W

Description

You WIll Receive: 2 Klipsch RP-280F Tower Speakers, 1 Denon AVR-X4200W, 1 Klipsch RP-450C Center, 1 BIC Acoustech PL-200, , 4 Klipsch CDT-5800-C II In-Ceiling Speaker

Klipsch RP-280F Floorstanding Tower Speakers:
  • Frequency response: 31-24Khz 3dB
  • Sensitivity: 98dB @ 2.83V/ 1m
  • Power handling (continuous/ peak): 150W/ 160W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1400Hz
  • High frequency driver: 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
  • Low frequency driver: Dual 8-inch cerametallic cone woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: Dual binding posts/ bi-wire/ bi-amp
"
Klipsch RP-450C Center Speaker:
  • Frequency Response: 62-24kHz 3dB
  • Sensitivity: 97dB @ 2.83V / 1
  • Power handling (continuous/ peak): 200W/800W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1100W/1400W
  • High frequency driver: 1"" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
  • Low frequency driver: Quad 5.25"" Cerametallic Cone Woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: single binding posts
""
Denon AVR-X4200W 7.2 Channel Audio/Video Receiver with Wi-Fi, Bluetooth, Apple Airplay, and Dolby Atmos:
  • 7-channel amplifier
  • 125 watts per channel into 8 ohms
  • Dolby and DTS surround sound decoding
  • Audyssey Platinum speaker calibration and system optimization
  • 4K/60p and 3D video pass-through
  • HDMI 2.0a audio/video switching: 8 in (includes 1 front-panel input), 3 out
  • 13.2-channel preamp outputs include outputs for 2 powered subwoofers
  • three-room/three-source output
  • Digital and Streaming Music Options
""
BIC/Acoustech Platinum Series PL-200 subwoofer
  • PL-200 is driven by an audiophile state-of-the-art BASH amplifier capable of delivering up to 1000-watts dynamic peak output
  • Front-Firing 12"" Long-Throw Powered Subwoofer with state-of-the-art BASH amplifier
  • Adjustable Crossover
  • Adjustable volume control
  • Automatic signal sensing
  • High level inputs
  • Dolby Pro Logic & Dolby Digital/DTS inputs.
"
Klipsch designed the CDT-5800-C II to meet the market's demand for a high-performance in-ceiling loudspeaker that easily challenges the inherent limitations of fixed locations.
  • Frequency Response: 49Hz-23Khz ? 3Db
  • Sensitivity: 95Db @ 2.83V / 1M
  • Power Handling: 50W Rms / 200W Peak
  • Nominal Impedance: 8 Ohms Compatible
  • Recommended Amplifier Power: 100 W
  • Low Frequency Driver: 8-inch (20.32Cm) Pivoting Cerametallic Cone Woofer
  • Crossover Frequency: 2230Hz
  • Enclosure Material/Type: Abs/Infinite Baffle, Front Flush With Wall

Reviews

  • Be the first to leave a review!

Sign In to leave a review