Dolby Atmos 3.1.4 Klipsch RP-280F Tower Speakers R115SW with Denon AVR-X3200W

Dolby Atmos 3.1.4 Klipsch RP-280F Tower Speakers R115SW with Denon AVR-X3200W

$3,848.60 (System)
682962776416

Model #: Dolby Atmos 3.1.4 Klipsch RP-280F Tower Speakers R115SW with Denon AVR-X3200W

Description

You WIll Receive: 2 Klipsch RP-280F Tower Speakers, 1 Denon AVR-X3200W, 1 Klipsch RP-450C Center, 1 Klipsch R-115SW, , 4 Klipsch CDT-5800-C II In-Ceiling Speaker

Klipsch RP-280F Floorstanding Tower Speakers:
  • Frequency response: 31-24Khz 3dB
  • Sensitivity: 98dB @ 2.83V/ 1m
  • Power handling (continuous/ peak): 150W/ 160W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1400Hz
  • High frequency driver: 1-inch titanium LTS tweeter with hybrid cross-section Tractrix horn
  • Low frequency driver: Dual 8-inch cerametallic cone woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: Dual binding posts/ bi-wire/ bi-amp

Klipsch RP-450C Center Speaker:
  • Frequency Response: 62-24kHz 3dB
  • Sensitivity: 97dB @ 2.83V / 1
  • Power handling (continuous/ peak): 200W/800W
  • Nominal impedance: 8 Ohms Compatible
  • Crossover frequency: 1100W/1400W
  • High frequency driver: 1-inch Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
  • Low frequency driver: Quad 5.25inch Cerametallic Cone Woofers
  • Enclosure type: Bass Reflex via rear-firing Tractrix port
  • Inputs: single binding posts

Denon AVR-X3200W 7.2 Channel Audio/Video Receiver with Wi-Fi, Bluetooth, Apple Airplay, and Dolby Atmos:
  • 7-channel amplifier
  • 105 watts per channel into 8 ohms
  • Dolby and DTS surround sound decoding
  • Audyssey Silver speaker calibration and system optimization
  • Upscales standard-definition video signals to HD and Ultra HD
  • HDMI 2.0a audio/video switching: 8 in (includes 1 front-panel input), 2 out
  • Preamp outputs for two powered subwoofers
  • Dual-room/dual-source output
  • Supports a 5.1.2 Atmos setup

Klipsch R-115SW 800 Watt Subwoofer:
  • 15 inch spun-copper Cerametallic woofer
  • All-digital amplifier delivers 800 watts of dynamic power
  • Front-firing slot port with exclusive internal flare technology
  • L/R line-level/LFE RCA inputs for compatibility with most receivers
  • For a simple wireless connection, add an optional Klipsch WA-2 Wireless Subwoofer Kit
  • Frequency response: 18Hz-125Hz +/-3dB
  • Maximum acoustic output: 122dB
  • Amplifier: All digital
  • Amplifier Power: 400W / 800W
  • Drive components: 15-inch (38.1 cm) long-throw copper spun cerametallic, front-firing woofer
  • Inputs: L/R line-level/LFE RCA jacks, Wireless WA-2 Port

Klipsch designed the CDT-5800-C II to meet the market's demand for a high-performance in-ceiling loudspeaker that easily challenges the inherent limitations of fixed locations.
  • Frequency Response: 49Hz-23Khz ? 3Db
  • Sensitivity: 95Db @ 2.83V / 1M
  • Power Handling: 50W Rms / 200W Peak
  • Nominal Impedance: 8 Ohms Compatible
  • Recommended Amplifier Power: 100 W
  • Low Frequency Driver: 8-inch (20.32Cm) Pivoting Cerametallic Cone Woofer
  • Crossover Frequency: 2230Hz
  • Enclosure Material/Type: Abs/Infinite Baffle, Front Flush With Wall

Reviews

  • Be the first to leave a review!

Sign In to leave a review